US260 Endmill for general machining of stainless steel
For small parts machining of 3C industry, suitable for roughing and finishing of stainless steel（＜380HB）
Using excellent substrate and coating technology, improving anti-collapse of roughing and wear resistance of finishing, and longer tool life
Suitable for high speed and high feed processing, face milling, side milling and shallow slot milling(ap≤0.1D)
It is recommended oil cooling and water cooling
 |
 |
 |
 |
- Feature
- Application
- Application case
US260 Endmill for General Machining of Stainless Steel
Product features
♦ For small parts machining of 3C industry, suitable for roughing and finishing of stainless steel（＜380HB）
♦ Using excellent substrate and coating technology, improving anti-collapse of roughing and wear resistance of finishing, and longer tool life
♦ Suitable for high speed and high feed processing, face milling, side milling and shallow slot milling(ap≤0.1D)
♦ It is recommended oil cooling and water cooling
| Workpiece Material | |||||
|
|
|
|
||
| 1234 | 5 | 123 | 123 | 123 | 4 |
| Carbon Steel、
Alloy Steel (＜35HRC) |
Alloy Steel,
Tool Steel (＜48HRC) |
Stainless Steel | Cast Iron | Heat-resistant
Alloys |
Titanium Alloys |
| ○ | ○ | ◎ | ○ | ○ | ○ |
◎ Most Suitable ○ Suitable
US260 application case（Heat dissipation plate）
| Specification | US260-S4A-12030 |
| Dimension | D12*30*75*d12 |
| Material | CF-8M(18-22HRC) |
| Cutting speed | Vc=56m/min |
| Feed rate | fz =0.05mm/z |
| Cutting depth | ap=0.5mm，ae=6mm |
| Cooling method | emulsion |
| Cutting method | face milling |
