SH160 Endmills for hardened steel(48-55HRC)
High hardness, high toughness matrix materials, special angle design special for hardened steels processing
Suitable for Finishing of 48~55HRC Hardened Steels
Recommended to use air or oil mist cooling.
 |
- Feature
- Application
- Application case
SH160 Endmills for Hardened Steels(48-55HRC)
Product features
♦ High hardness, high toughness matrix materials, special angle design special for hardened steels processing
♦ Suitable for Finishing of 48~55HRC Hardened Steels
♦ Recommended to use air or oil mist cooling.
| Workpiece Material | |||||
 |
|
||||
| 1 2 3 4 | 5 | 6 | 1 | 2 | 3 4 |
| Carbon Steel,
Alloy Steel (＜35HRC) |
Alloy Steel
Steel(≤48HRC) |
PH,Ferrite,
Martensite Steel (＜35HRC) |
Hardened Steel (45-55HRC) | Hardened Steel (55-60HRC) | Hardened Steel (＞60HRC) |
| ◎ | |||||
◎ Most Suitable ○ Suitable
SH160 application case（shim）
| Specification | SH160-S2-00501 |
| Dimension | D0.5*1.5*50*d4 |
| Material | 40Cr(30HRC) |
| Cutting speed | Vc=30m/min |
| Feed rate | fz =0.01mm/z |
| Cutting depth | ap=0.04mm，ae=0.4mm |
| Cooling method | emulsion |
| Cutting method | slotting |
