FH200-H Endmills optimized for high feed milling of hardened steel
Dedicated to high feed rough machining of 35~65HRC high hardness material
Special-purpose tool type design, Perfect implementation thin cutting effect, realize high feed rough machining, Significantly improve the processing efficiency
Use Newly Super Fine Carbide matrix, and match with new generation hard coating, that enables high wear-resistant as well as high thermal stability for various working condition
 |
 |
- Feature
- Application
- Application case
FH200-H Endmills Optimized for High Feed milling of Hardened Steels
Product features
♦ Dedicated to high feed rough machining of 35~65HRC high hardness material
♦ Special-purpose tool type design, Perfect implementation thin cutting effect, realize high feed rough machining, Significantly improve the processing efficiency
♦ Use Newly Super Fine Carbide matrix, and match with new generation hard coating, that enables high wear-resistant as well as high thermal stability for various working condition
| Workpiece Material | |||||
|
|
||||
| 1 2 3 4 | 5 | 6 | 1 | 2 | 3 4 |
| Carbon Steel,
Alloy Steel (＜35HRC) |
Alloy Steel
(≤48HRC) |
PH,Ferrite,
Martensite Steel (＜35HRC) |
Hardened Steel (45-55HRC) | Hardened Steel (55-60HRC) | Hardened Steel (＞60HRC) |
| ◎ | ◎ | ◎ | ◎ | ||
◎ Most Suitable ○ Suitable
FH200 application case（Rear suspension bracket）
| Specification | FH200-R6-08005-H |
| Dimension | D8*R0.5*7*24*75*d8*D7.5 |
| Material | SKD11(58-62 HRC) |
| Cutting speed | Vc=60m/min |
| Feed rate | fz =0.14mm/z |
| Cutting depth | ap=0.1mm，ae=6mm |
| Cooling method | Air-cool |
| Cutting method | side milling |
