Titanium Alloy Mobile Phone Frame
The titanium alloy mobile phone frame is made of TC4 material, which is a profile material with little machining allowance. The bottom edge is mostly processed, making it a typical mobile phone frame part
- ① High Efficiency Rough Face Milling
- ② Frame Profile Machining
- ③ Deep/Narrow Slot Machining
- ④ Side Hole Making
- ⑤ Micro-hole Making
- ⑥ Thread Machining
ST300
Suitable for high performance processing of titanium alloys.
The new titanium alloy milling grade is adopted, which has significant improvement in wear resistance and bond resistance.
Special corner radius treatment, improve the cutting edge strength and sharpness, effectively reduce the vibration caused by corner radius.
The use of enhanced large helix angle design and unequal tooth pitch can reduce the harmonics produced by cutting, and eliminate bad chatter.
A professional 5-edge design has been added, designed to exceed the productivity of 4-edge endmills.
 |
 |
 |
 |
Exterior Profile Solid Carbide Machining
For non-standard products, please consult the business personnel of each operation center
T-Shape Cutter/Dovetail Cutter
For non-standard products, please consult the business personnel of each operation center
Titanium Alloy Endmill/Chamfer Cutter
For non-standard products, please consult the business personnel of each operation center
Small Drill/Step Drill
For non-standard products, please consult the business personnel of each operation center
Tap
For non-standard products, please consult the business personnel of each operation center