Hub
Wind turbine hub, belongs to the wind turbine pitch system, the main material is cast iron, such as gray iron, QT400, etc., the main demand for face milling, reverse milling and hole machining tools
- 1. Rough Milling of Connecting Surface
- 2. Finishing Milling of Connecting Surface
- 3. Rough Milling of Connecting Surface Side Walls
- 4. Back Milling of Connecting Surface
- 5. Machining Screw Insert and Milling Motor
- 6. Drill of Connecting Surface
HNG(K)U+MFC115&145&160
1.Double-side with 12 cutting edges achieving cost effective
2.The sectional cutting edge design for the inserts which make the insert is matched with 3 different entering angle holders
3.Suitable for roughing and semi-finishing of steel, stainless steel and cast iron
 |
 |
 |
 |
ANKX+MEC190
1.Negative type thickening design, with high strength, suitable for heavy cutting
2.Match with corn milling cutter holder, suitable for high efficiency heavy cutting
3.Suitable for semi-finishing and roughing machining of steel, cast iron
|
|
|
|
ANKX+MHC190
1.Negative type thickening design, with high strength, suitable for heavy cutting
2.Match with corn milling cutter holder, suitable for high efficiency heavy cutting
3.Suitable for semi-finishing and roughing machining of steel, cast iron
SDMT12-EGM
Multi-Function Milling Tool
RC+MPC100
1.With economical and high effciency,suitable for the profile milling of mould industry
2.Anti-rotation design,ensure stable cutting
3.Suitable for semi-finish and roughing machining of steel
|
|
|
|
GHDS series
Suitable for drilling of steel, cast iron and stainless steel with a hole depth of φ14.0mm-φ51.0mm and within 5D
|
|
|
|