1.Double-side with 12 cutting edges achieving cost effective
2.The sectional cutting edge design for the inserts which make the insert is matched with 3 different entering angle holders
3.Suitable for roughing and semi-finishing of steel, stainless steel and cast iron

1.The insert is with thickening double face negative eight edges design, good strength, stable processing
2.There are different cutting edge angles of 45°/75°/88°/ R radius
3.Suitable for the semi-finishing and roughing face milling of steel and cast iron

Helical Edge Corn Milling

Suitable for machining low carbon steels, medium carbon steels, high carbon steels, and alloy steels with hardness below 30HRC

Suitable for Drilling mild Steel, Interrupted cutting, defective Coolant condition and other severe working conditions

For customized products, please consult the business personnel of each operation center

Suitable for drilling of steel, cast iron and stainless steel with a hole depth of φ14.0mm-φ51.0mm and within 5D

Suitable for drilling of steel, cast iron, and stainless steel with a hole depth of φ10.0mm-φ21.9mm and a hole depth within 5D

Suitable for rough boring and fine boring of φ2.0mm-φ3300.0mm steel, cast iron and stainless steel