1.Double-side with 12 cutting edges achieving cost effective
2.The sectional cutting edge design for the inserts which make the insert is matched with 3 different entering angle holders
3.Suitable for roughing and semi-finishing of steel, stainless steel and cast iron

1.With economical and high effciency,suitable for the profile milling of mould industry
2.With a full range of geometry,available from light cutting to heavy cutting
3.Suitable for semi-finish and roughing machining of steel

1.With economical and high effciency,suitable for the profile milling of mould industry
2.With a full range of geometry,available from light cutting to heavy cutting
3.Suitable for semi-finish and roughing machining of steel

1.Suit for die steel without heat treatment and surfacing solder；Suit for rough and semi-finish
2.Progressive entry make insert not easily damaged
3.Combination of positioning surface and limit surface make processing more stable

1.Helical edge design, effectively reduce cutting resistance
2.V-shaped positioning surface and patented guide rail structure, ensure the installation is more firm, high processing accuracy
3.Suitable for finishing machining of hardened steel and cast iron

1.Suitable for efficient processing of high hardness materials
2.Two types of tool tip design combined with multi specification circular arc transition structure design meet the processing of different profiles
3.Anti reverse loading structure design, bringing intimate experience to users

Suitable for finishing and semi-finishing of 45 ~ 65 HRC high hardness materials.
The substrate material with high strength and toughness is matched with the newly developed coating for hardness steel machining, which can effectively extended service life of cutting tools.
Unique flutes structure, achieving excellent processing of high hardness steel.
It is recommended to use oil cooling or oil mist.

Adopt GU ultra-fine grain substrate and TiAlSiN high performance nano coating.
Special angle and reduced neck design
High precision edge diameter precision, high precision head contour, high precision cutter Handle (H5).
Suitable for precise deep hole machining of hardened steel, pre-hardened steel and other materials (hardness HRC≤65)

1.Negative type thickening design, with high strength, suitable for heavy cutting
2.Match with corn milling cutter holder, suitable for high efficiency heavy cutting
3.Suitable for semi-finishing and roughing machining of steel, cast iron

1.Negative six edges design, with high economical efficiency
2.Available for face milling, shoulder milling, grooving milling and so on
3.Suitable for semi-finishing and roughing machining of steel and cast iron

Suitable for drilling of steel, cast iron and stainless steel with a hole depth of φ14.0mm-φ51.0mm and within 5D

Suitable for drilling of steel, cast iron, and stainless steel with a hole depth of φ10.0mm-φ21.9mm and a hole depth within 5D

Suitable for efficient Drilling of Steel, Cast Iron and Stainless steel