Conventional -Body
Planetary reducer is a versatile industrial product that can reduce the speed of the motor while increasing the output torque. The box is an important component of the reducer, it is the base of the transmission parts, according to different application scenarios, the common box materials are cast iron, cast steel and aluminum alloy.
- 1. Install Face Milling
- 2. Thread Hole Making
- 3. Bottom Large Surface Milling
- 4. Base Mounting Hole Making
- 5. Boring
WNG(M)U+MEE190
1.Negative six edges design, with high economical efficiency
2.Available for face milling, shoulder milling, grooving milling and so on
3.Suitable for semi-finishing and roughing machining of steel and cast iron
 |
 |
 |
 |
D918S
Suitable for Drilling mild Steel, Interrupted cutting, defective Coolant condition and other severe working conditions
|
|
|
T118
Suitable for machining carbon steels, alloy steels materials
|
|
 |
|
HNG(K)U+MFC115&145&160
1.Double-side with 12 cutting edges achieving cost effective
2.The sectional cutting edge design for the inserts which make the insert is matched with 3 different entering angle holders
3.Suitable for roughing and semi-finishing of steel, stainless steel and cast iron
|
|
|
|
GHDS series
Suitable for drilling of steel, cast iron and stainless steel with a hole depth of φ14.0mm-φ51.0mm and within 5D
|
|
|
|
GBR-FB Series Large Diameter Fine Boring Cutter
Suitable for fine boring of φ2.0mm-φ3300.0mm steel, cast iron and stainless steel
GBR-RB Series Large Diameter Rough Boring Cutter
Suitable for rough boring of φ2.0mm-φ3300.0mm steel, cast iron and stainless steel