Car Bumper
Automobile bumper mold belongs to injection molding, the quality of the mold directly affects the appearances, configuration integrity and anti-collision ability of the automobiles. Mold commonly uses materials such as P20, NAK80, 1.2738, etc.,after tempering treatment, material hardness remains approximately HRC35 ~ 38,cutting tool can satisfy the high precision, high quality, long life of the processing requirements. GESAC provides bumper mold processing solutions,including roughing, semi-f...
- 1. Rough Milling
- 2. Semi-finishing
- 3. Finishing
- 4. Drilling
- 5. Deep-hole Machining
- 6. High Finish Boring
SDMT+MKB113
1.With A big arc curve edge design,improve the strength of The R angle
2.Suitable for roughing machining of steel, cast iron, stainless steel and difficult-to-cut material
 |
 |
 |
 |
APM(G)T+MEA190
1.Several geometries available, suitable for different cutting condition
2.Special geometries for aluminum alloy, suitable for machining of aluminum alloy
3.Suitable for roughing machining of steel, stainless steel, cast iron and aluminum alloy
|
|
|
 |
|
RD+MPA100
1.With economical and high effciency,suitable for the profile milling of mould industry
2.With a full range of geometry,available from light cutting to heavy cutting
3.Suitable for semi-finish and roughing machining of steel
|
|
|
|
RP+MPB100
1.With economical and high effciency,suitable for the profile milling of mould industry
2.With a full range of geometry,available from light cutting to heavy cutting
3.Suitable for semi-finish and roughing machining of steel
|
|
|
|
APK(E)T+MEB190
1.The edge is with curve type design to decrease the cutting resistance.
2.Match with corn milling cutter holder, with high milling efficiency.
3.Suitable for semi-finishing and roughing machining of steel, stainless steel, cast iron and aluminum alloy.
|
|
|
|
|
QTD-V-S+MBB100&200
1.Helical edge design, effectively reduce cutting resistance
2.V-shaped positioning surface and patented guide rail structure, ensure the installation is more firm, high processing accuracy
3.Suitable for finishing machining of hardened steel and cast iron
|
|
 |
SP210
Suitable for high efficiency machining of steels﹠cast iron(≤48HRC)
Variable helix angle and differential flute pitch, outstanding anti-vibration ability
Applicable to high efficiency machining with large cutting depth（ap）and large cutting width（ae）
|
|
|
GHDS series
Suitable for drilling of steel, cast iron and stainless steel with a hole depth of φ14.0mm-φ51.0mm and within 5D
|
|
|
|
GUMD series
Suitable for drilling of steel, cast iron, and stainless steel with a hole depth of φ10.0mm-φ21.9mm and a hole depth within 5D
|
|
|
TOGT+GQ101
For non-standard products, please consult the business personnel of each operation center
D938
Suitable for efficient Drilling of Steel, Cast Iron and Stainless steel
|
|
|
TPEH+GCK
High Finish Boring